Ultravolt Authorised Dealers & Distributors in India
Looking for an authorised Ultravolt dealer or distributor for cable procurement? This page provides the canonical paths to find a verified outlet. Always insist on the original sealed coil with the manufacturer's printed ISI mark, CM/L number and IS year — verifiable at bis.gov.in.
| Founded | 2026 |
|---|---|
| Head office | Mumbai, Maharashtra |
| BIS CM/L | Not under BIS scope (IEC standard) |
| Voltage rating | 1100V (IS 694:2010) |
About Ultravolt's dealer network
Launched September 2026 with a ₹1,800 cr investment; manufacturing at Jhagadia (Bharuch, Gujarat). Distribution targets 1,00,000+ retailers plus 5,000+ UltraTech Building Solutions (UBS) outlets across 500+ districts — second-largest wires manufacturing capacity in India at launch.
Greencore (HR FR LF, 90 m / 180 m packs), SafePlus (FR-LSH LF), NextGen (E-Beam crosslinked HFFR, 125 °C). Sizes 0.75–6.0 sqmm single-core; IS 694:2010 and IS 17048:2018.
Buyers who want Aditya Birla Group backing with Hindalco-sourced copper, or procurement already routed through UltraTech Building Solutions outlets. New entrant (2026) — dealer depth is still building out relative to incumbents, so confirm local availability before specifying.
Find an authorised Ultravolt dealer
Ultravolt does not have a public dealer-locator listed on their official site. For project-tier procurement, contact Ultravolt directly through their corporate website — and verify the dealer's BIS licence at bis.gov.in before purchase.
For Ultravolt authorised dealers
If you are an authorised Ultravolt stockist or distributor and would like to be listed on this platform, register via /submit-pricelist mentioning your dealership status. We verify each submission against the brand's authorised list before publishing.
This dealer directory is not a paid placement programme. Listings are free and based on authorised-dealer verification only.
VERIFY BEFORE PURCHASE · ULTRAVOLT
- CM/L printed every metre. Authentic Ultravolt cable carries its BIS licence number printed at regular intervals on the outer sheath. Absence of the licence number is disqualifying — no exceptions.
- ISI marking. Required on every coil. Coils without the ISI mark cannot be certified post-installation and are not insurable under NBC 2016.
- BIS portal verification. Cross-check the licence number against the active register at bis.gov.in. The licence must be current and must cover the IS standard relevant to your application — IS 694:2010 for FR / FR-LSH; IS 17048:2018 for HFFR; separate licences.
- Authorised-dealer purchase. Buy only from a Ultravolt authorised distributor. See the Ultravolt dealer locator on this site, or the manufacturer's official network.